ZHENGOU GroupZHENG'OU

Применение

Реконструкция полов и старые плиты

Пыление, изношенный бетон и производственный график, который нельзя останавливать на недели. Проникающие упрочнители и грунтовки восстанавливают поверхность без остановки завода.

Что этот пол должен выдерживать

Поймите характер разрушения до того, как выбирать систему.

  1. 01

    Dusting concrete coats products, machinery and air filters — and it gets worse every year.

  2. 02

    The schedule cannot stop for weeks — the floor has to come back between shifts.

  3. 03

    Old coatings, oils and contamination decide what the new system can bond to.

  4. 04

    Budgets differ per zone — one factory rarely needs one solution everywhere.

Реконструкция полов и старые плиты

Рекомендованные системы покрытия

Подбор по нагрузке — универсальной системы не существует, есть подходящая.

01

Sealed & densified floor (no coating)

Конструкция пола
Grind off the weak layer → densifier reacts inside the slab → progressive polish

For dusting, worn slabs that must return to service fast: nothing to peel, low cost per square metre, long service life.

Продукты в системе

02

Primer + new build-up renovation

Конструкция пола
Assess and repair slab → penetrating epoxy primer → mortar/filler → new topcoat per duty

When the slab is structurally sound but the surface has failed: rebuild the system without tearing out the concrete.

Стандартная последовательность работ

Один и тот же пол из одних и тех же материалов служит на годы дольше, если работы выполнены аккуратно. Шесть шагов ниже — наш стандарт для эпоксидных полов: что делает каждый шаг, по какому стандарту и что мы проверяем при сдаче. Для вашего цеха мы подстроим количество слоёв и толщину под фактические нагрузки, химическую среду и технологическое окно.

  1. 01

    Substrate assessment

    Bond, contamination and moisture checks decide which renovation route is viable. The assessment decides between a resurfacing route and a full rebuild — pricing and schedule follow from it.

  2. 02

    Removal & repair

    Failed coatings and loose material ground off; cracks and holes repaired. After stripping, strength is re-tested; areas still short go deeper.

  3. 03

    Densifier route

    Penetration, reaction and progressive polishing bring the slab back harder than new. For dusting floors this route is preferred — no added film, the slab itself is hardened.

  4. 04

    Coating route

    Penetrating primer, build-up and a new topcoat matched to the zone duty. Renovation coatings lean on primer penetration; fast-absorbing areas take a double primer.

  5. 05

    Phased return to service

    Zones come back between shifts; production barely notices. Before each zone returns, a clean-down and protection briefing prevents cross-scratching.

Фото с объектов

Готовые полы, снятые на объекте, — нажмите, чтобы увеличить и рассмотреть детали.

Densified old slab

A dusting floor brought back to a dense, polished surface.

Renovated working floor

New build-up over a sound slab — production never stopped.

Показательные объекты

Часть объектов, реализованных группой.

  • Automotive paint-shop renovation

    Renovating a live paint shop is a scheduling problem before it is a flooring one. For automotive clients including FAW, SAIC, Dongfeng, Beijing Benz, Geely, BYD, XPeng and NIO, we strip and re-lay floors zone by zone inside the owner's maintenance windows while the rest of the shop keeps producing.

  • Pharmaceutical workshop renewal without shutdown

    For clients such as Shineway Pharmaceutical, Huahai Pharmaceutical and Xinhua Pharmaceutical we have renewed workshop floors without stopping production: zoning, dust containment and low-odour solvent-free materials keep the clean areas clean while we work next door.

  • Residential garage refurbishment

    Older residential garages fail at the joints, the ramps and the oily bays first. On projects such as China Merchants' Cuican Mansion and the Xipai Jingyue development we renew traffic lanes and bays in phases, keeping half the garage usable throughout.

Частые вопросы

Что покупатели спрашивают чаще всего при подборе покрытия для пола.

Our floor is dusting badly. Densifier or coating?

If you need a hard, dust-free concrete surface and speed, densify. If you need colour, chemical resistance or washability, coat it — often both routes combine zone by zone.

Подробнее
Can we avoid tearing out the old floor?

Usually yes. As long as the slab is structurally sound, the new system goes over it after grinding and repair — no demolition.

Подробнее
How fast can we get back to work?

Densified areas come back within days; coated zones follow the curing plan. Everything is phased so shifts keep running.

Подробнее
The old coating is still sticking in places — can it stay?

Possibly — adhesion testing decides. Sound, well-bonded areas can stay and be bridged; failing areas must go, or they will drag the new system down with them.

Подробнее

Расскажите о вашем полу

Пришлите тип основания, площадь и нагрузки на пол. Вы получите рекомендованную систему, конструктив пола и коммерческое предложение — как правило, в течение одного рабочего дня.

Запросить расчёт